What to do if thomann Stairville CLB5 6P RGB WW Compact LED Bar DJ Equipment has no response to the DMX controller?
- JJames RoblesAug 2, 2025
If your thomann DJ Equipment isn't responding to the DMX controller, here's what you can check: 1. If the dot after the last digit in the display does not flash in ‘DMX’ mode, this means no DMX signal is being received. Ensure your DMX controller is powered on and verify that the DMX connectors and cables are properly connected. 2. If the dot is flashing, but there's still no response, examine the address settings and DMX polarity. 3. Try a different DMX controller to rule out issues with the current one. 4. Make sure the DMX cables aren't running close to high-voltage cables, as this may cause interference.