thomann STAIRVILLE LED PAR56 24x3W RGB MKII User Manual (English)

Paige AlvarezAug 2, 2025

What to do if thomann STAIRVILLE LED PAR56 24x3W RGB MKII has no response to the DMX controller?

V
vwardAug 2, 2025
If your thomann DJ Equipment isn't responding to the DMX controller, here are a few things to check: * If the display is active, make sure a dot is lit in the first digit when the unit is in DMX mode. If not, no valid DMX data is being received. Ensure the DMX controller is on and that the DMX connectors and cables are properly connected. * Verify the address settings and DMX polarity. * Try a different DMX controller. * Ensure that DMX cables aren't running near high voltage cables, as this can cause damage or interference.

Type	LED PAR
Light Source	24x 3W RGB LEDs
DMX Connection	3-pin XLR
Beam Angle	25°
Power Consumption	80 W
Power Supply	100-240 V, 50/60 Hz
Housing Material	Aluminium
Colour	Black
Protection Class	IP20
Control	Master/Slave

Type

LED PAR

Light Source

24x 3W RGB LEDs

DMX Connection

3-pin XLR

Beam Angle

25°

Power Consumption

80 W

Power Supply

100-240 V, 50/60 Hz

Housing Material

Aluminium

Colour

Black

Protection Class

IP20

Control

Master/Slave

Summary

General Information

Further Information

Details on further information and details available on the website.

Notational Conventions

Explains the notational conventions used in the manual.

Symbols and Signal Words

Provides an overview of symbols and signal words used in the manual.

Safety Instructions

Intended Use

Details the intended use of the device and user qualifications.

Installation

Risk of Injury Caused by Falling Objects

Ensures installation compliance and secure device mounting with safety attachments.

Risk of Overheating

Specifies minimum distance for light output and ambient temperature limits.

Use of Stands

Guidance on safe and stable mounting of the device on stands.

Possible Data Transmission Errors

Recommends dedicated DMX cables and prohibits connecting to audio devices.

Connections and Controls

Rear Panel

Illustrates and labels the rear panel connectors and controls of the device.

Operating

Starting the Device

Instructions on how to connect the device to power and initiate operation.

Main Menu

Describes how to activate the main menu and select operating modes.

DMX Mode

Explains how to select DMX modes (3-channel or 5-channel) for device control.

DMX Address

Details setting the DMX address for device communication and lists highest possible addresses.

Display Blackout

Instructions for enabling or permanently turning on the device display.

Operating Mode 'Master'

Guides on configuring the device to operate as a Master in a group.

Operating Mode 'Slave'

Instructions for configuring the device to operate as a Slave in a group.

Operating Mode 'Show 1'

Explains how to select preprogrammed automatic shows and set their speed.

Operating Mode 'Show 2'

Details selecting preprogrammed automatic shows and setting their speed.

Sound Control

Instructions for enabling or disabling sound control for automatic colour changes.

Manual Test

Describes how to perform a manual test of LED colours and strobe effects.

Menu Overview

Provides a visual overview of the device's menu structure and options.

Functions in 3-channel DMX mode

Details the functions assigned to each channel in 3-channel DMX mode.

Functions in 5-channel DMX mode

Details the functions assigned to each channel in 5-channel DMX mode.

Plug and Connection Assignments

Introduction

Guidance on selecting appropriate cables and plugs for connecting equipment.

DMX Connections

Explains the pin assignment for 3-pin XLR sockets used for DMX input and output.

Cleaning

Optical Lenses

Instructions for cleaning the optical lenses to maintain light output quality.

Fan Grids

Guidelines for cleaning fan grids to prevent contamination and ensure proper operation.

thomann STAIRVILLE LED PAR56 24x3W RGB MKII User Manual

Table of Contents

Questions and Answers:

thomann STAIRVILLE LED PAR56 24x3W RGB MKII Specifications

Summary

General Information

Further Information

Notational Conventions

Symbols and Signal Words

Safety Instructions

Intended Use

Features

Installation

Risk of Injury Caused by Falling Objects

Risk of Overheating

Use of Stands

Possible Data Transmission Errors

Starting Up

Connections and Controls

Rear Panel

Operating

Starting the Device

Main Menu

DMX Mode

DMX Address

Display Blackout

Operating Mode 'Master'

Operating Mode 'Slave'

Operating Mode 'Show 1'

Operating Mode 'Show 2'

Sound Control

Manual Test

Menu Overview

Functions in 3-channel DMX mode

Functions in 5-channel DMX mode

Technical Specifications

Plug and Connection Assignments

Introduction

DMX Connections

Troubleshooting

Possible Data Transmission Errors

Cleaning

Optical Lenses

Fan Grids

Protecting the Environment

Disposal of the Packaging Material

Disposal of Your Old Device

Related product manuals