thomann t.amp E-400 - Understanding Operating Modes

Depending on the individual application, the amplier can be used in dierent operation
modes:
Stereo mode
The two amplier channels operate independently of one another, either
channel (A and B) is amplied and connected to loudspeakers, the volume can
be controlled separately for the two outputs.
Parallel mode
The two amplier channels receive the same input signal from channel A and
loudspeakers are connected to each amplier, the volume is controlled via the
control knob for channel A.
Bridged mode
The two amplier channels are internally connected in such a way that twice
the output power is available. Only the input signal from channel A is amplied
and loudspeakers are connected only to the correspondingly marked output.
The volume is controlled via the control knob for channel A.
Possible operation modes
Installation and starting up
power amplier
16