Need help?Do you have a question about the thomann the t.amp E-800 and is the answer not in the manual?
General| Amplifier type | Class D |
|---|---|
| Channels | 2 |
| Minimum impedance | 2 Ohms |
| Frequency response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.1% |
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 0.775 V |
| Input Connectors | XLR, 6.3 mm Jack |
| Output Connectors | Speaker Twist |
| Cooling | Fan |
| Protection Features | Short circuit |
| Rack Units | 2 |
Explains symbols and signal words used for clear communication of dangers and information within the manual.
Specifies proper use and that the device is for persons with sufficient abilities, or supervised.
Covers dangers for children, electric shock, hearing damage, fire risk, operating conditions, and magnetic fields.
Instructions on unpacking, checking for damage, and keeping packaging for transport or storage.
Details XLR, Jack, and speakON connector pin assignments for inputs and outputs.
Details Stereo, Parallel, and Bridged modes for different amplification applications.
Information on rack mounting dimensions and loudspeaker impedance guidelines.
Details the front panel controls, indicators, and volume adjustments.
Explains rear panel connectors, switches, selectors, and protection features.
Guidance on environmentally friendly disposal of packaging materials.
Information on proper disposal of the device according to directives and local regulations.
To Next Page