thomann the box pro DSP 108 User Manual

Press [MASTER VOL | PUSH FOR DSP] four times during operation to call up the unit's DSP func‐
tion ‘High Pass Filter’ . ‘80 Hz’ (frequency attenuation below 80 Hz) appears in the display. Press
again [MASTER VOL | PUSH FOR DSP] to enable this function. Or turn the knob to select another
cut-o frequency ‘100 Hz’ , ‘120 Hz’ or ‘150 Hz’ and press [MASTER VOL | PUSH FOR DSP] to call it
up.
Press [MASTER | PUSH FOR DSP] to call up the main menu and turn [MASTER | PUSH FOR DSP]
until the display shows the DSP function ‘LED MODE’ . Press [MASTER | PUSH FOR DSP] to enable
the function. Turn [MASTER | PUSH FOR DSP] until the display shows ‘OFF’ (LED indicator o),
‘ON’ (LED indicator permanently on) or ‘LIMITER’ (LED indicator blinks when the limiter is ena‐
bled) and press [MASTER | PUSH FOR DSP] to conrm.
Low-Cut lter
Setting the LED mode
DSP functions
DSP 108, 110, 112, 115
23

thomann the box pro DSP 108 Specifications

General

Brand	thomann
Model	the box pro DSP 108
Category	Speakers
Language	English