Do you have a question about the thomann the box pro TPC25 and is the answer not in the manual?
Access manual downloads, search functions, online guides, and technical support via website.
Explains lettering conventions, symbols, and signal words used for clarity in the manual.
Defines the device's purpose and user requirements for safe operation.
Details the front panel interface: limiter LEDs, power indicator, and main ON/OFF switch.
Describes rear panel connections (power, inputs, outputs) and the ground lift switch.
Instructions for mounting the unit in a standard 19-inch rack.
Guidance on configuring device settings using internal jumpers.
Diagram illustrating the locations of internal jumpers for configuration.
Detailed steps for setting crossover frequencies using jumpers for channels 1 and 2.
Instructions for setting delay times for subwoofer outputs using jumpers.
Explains the pinout for XLR plugs and correct balanced wiring.
Step-by-step guide for cleaning the device's fan grids.
Instructions for recycling the product's packaging materials.
Guidance on disposing of the old device according to WEEE and local regulations.
Access manual downloads, search functions, online guides, and technical support via website.
Explains lettering conventions, symbols, and signal words used for clarity in the manual.
Defines the device's purpose and user requirements for safe operation.
Details the front panel interface: limiter LEDs, power indicator, and main ON/OFF switch.
Describes rear panel connections (power, inputs, outputs) and the ground lift switch.
Instructions for mounting the unit in a standard 19-inch rack.
Guidance on configuring device settings using internal jumpers.
Diagram illustrating the locations of internal jumpers for configuration.
Detailed steps for setting crossover frequencies using jumpers for channels 1 and 2.
Instructions for setting delay times for subwoofer outputs using jumpers.
Explains the pinout for XLR plugs and correct balanced wiring.
Step-by-step guide for cleaning the device's fan grids.
Instructions for recycling the product's packaging materials.
Guidance on disposing of the old device according to WEEE and local regulations.
| Frequency range | 20 Hz - 20 kHz |
|---|---|
| Weight | 2.5 kg |
| Channels | 2 |
| Inputs | XLR |
| Outputs | XLR |
| Power supply | 230 V AC, 50 Hz |