Need help?Do you have a question about the thomann the t.bone IEM 100 and is the answer not in the manual?
General| Frequency Band | UHF |
|---|---|
| Modulation | FM |
| Transmitter Power | 10 mW |
| Frequency response | 20 Hz - 20 kHz |
| Connector | 3.5 mm jack |
| Color | Black |
| Components | Transmitter, Receiver, Earphones |
| System | Wireless In-Ear Monitoring System |
Explains the meaning of symbols and signal words used throughout the manual.
Specifies the intended purpose of the device and the qualifications required for users.
Covers DANGER, WARNING, and NOTICE alerts for safe operation and potential hazards.
Details the main components of the IEM 100 UHF wireless system.
Specifies the operating frequency range and the number of systems that can run simultaneously.
Instructions for unpacking, checking for damage, and general setup precautions.
Guidelines for optimal wireless operation, including frequency harmonization in the EU.
Covers rack mounting, antenna attachment, and audio input connections for the transmitter.
Instructions for inserting batteries and preparing the receiver for operation.
Step-by-step guide to powering on and testing the transmitter and receiver system.
Identifies and explains the controls and connections on the transmitter's front panel.
Details the ports and connectors located on the rear panel of the transmitter.
Explains the various indicators and information displayed on the transmitter's screen.
Details the controls, ports, and indicators on the bodypack receiver unit.
Explains the meaning of icons and indicators shown on the receiver's display.
Guides on setting frequency, channel, operating mode, and input level for the transmitter.
How to choose between stereo and mono modes for the transmitter.
Procedure to lock the transmitter settings to prevent accidental changes.
Guidance on setting the input sensitivity for optimal audio signal.
Guides on setting frequency, channel, and treble boost for the receiver.
Explains how to enable treble boost and lock receiver settings.
Lists technical parameters of the receiver, including output, frequency range, sensitivity, and more.
Lists technical parameters of the transmitter, including input/output, frequency range, gain, and power.
Provides a list of all available channels and their corresponding operating frequencies.
Explains the principles of balanced and unbalanced audio transmission for optimal sound quality.
Details the pin assignments for 1/4-inch TS (mono) and TRS (stereo) unbalanced plugs.
Explains the pin assignment for XLR plugs used for balanced signal input on the transmitter.
Provides remedies for common problems such as no sound or interrupted transmission.
Offers solutions for issues related to distorted audio output.
Guidelines for the proper disposal and recycling of product packaging materials.
Instructions for the safe and legal disposal of batteries according to local regulations.
Information on disposing of the device in compliance with the European WEEE directive.
To Next Page
