Audio signal Type 4 × XLR (mono, balanced)
Level +12 dBu
Impedance 20 kΩ (balanced), 10 kΩ (unbalanced)
Output connections Audio signal Type Screw terminal strip
4 × 6.35 mm (1/4-inch) jack socket (mono,
balanced, Pre Out)
Level +43 dBu
Impedance 100 Ω
Output power 200 Ω 4 × 40 W RMS (89 V)
4 × 50 W RMS (100 V)
Frequency response 20 Hz…20 kHz
–0.3 dB
Signal-to-noise ratio > 105 dBu
Total harmonic distortion (THD) < 0.03 % (1 kHz, –10 dBu, 200 Ω)
Crosstalk > 70 dBu
20 Hz…20 kHz
Digital signal processing Digital signal processor 32 bit
Technical specications
DSP 4x4 Amp 4.250, DSP 4x4 Amp100V
35
Controller