thomann Varytec Sidus X4 QUAD

Questions and Answers

L
Lauren DonaldsonAug 11, 2025
What to do if thomann Varytec Sidus X4 QUAD has no response to the DMX controller?
- A
  amygalvanAug 12, 2025
  If your thomann Projector doesn't respond to the DMX controller, and the display flashes in DMX mode, it indicates that no DMX signal is being received. Ensure that the DMX controller is switched on and verify the DMX connectors and cables for a secure connection. Also, check the address settings and DMX polarity. If problems persist, try an alternative DMX controller. It's also important to ensure that the DMX cables are not running near high-voltage cables, as this can cause interference.
J
James AllenAug 19, 2025
Why thomann Varytec Sidus X4 QUAD Projector has apparently no function despite proper power supply?
- M
  martinmichaelAug 19, 2025
  If your thomann Projector appears to have no function despite being properly powered, ensure it is not in DMX or ‘slave’ mode. If it is, test the unit in another mode.
M
Mary Bartlett MDAug 27, 2025
What to do if thomann Lighting Equipment has no response to the DMX controller?
- F
  frank22Aug 27, 2025
  If your thomann Lighting Equipment isn't responding to the DMX controller, here's what you can check: * If the device is in DMX mode and the display is flashing, ensure the DMX controller is on and that all DMX connections and cables are properly connected. * If the device is in DMX mode, a DMX controller is connected and on, but no dot flashes, verify the DMX controller is on and the DMX connections/cables are secure. * If a dot flashes on the display but there's still no response, check the address settings and DMX polarity. * Try using another DMX controller to rule out controller issues. * Make sure DMX cables aren't running near high-voltage cables, which can cause interference.
T
Thomas CaseSep 2, 2025
How to troubleshoot thomann Lighting Equipment when there is no light and the display is dark?
- D
  denise40Sep 2, 2025
  If your thomann Lighting Equipment is not working, shows no light, and the display is dark, check the mains connection and the fuse.

thomann Varytec Sidus X4 QUAD Specifications

General

Type	LED Moving Head
Power Consumption	60 W
Control Protocol	DMX 512
Housing Colour	Black
Power Supply	100 - 240 V, 50/60 Hz
Light Source	LED
Control	DMX
Operating Modes	DMX

thomann Varytec Sidus X4 QUAD - User Manual

Table of Contents

Questions and Answers

thomann Varytec Sidus X4 QUAD Specifications