page 20
Note
Step
13
Ra'l_Assembly
CONGRATULATIONS !
You have now completed your assembly of the Ultimate Slate Pool Table rM
You can do a final level check by rolling a ball slowly in a straight line from
one end of table to the other. If the ball drifts to either side, adjust the table
accordingly with the Floor Guard rM leg leveler and leg leveler wrench as in
Step 4. Roll the ball down the table as before to confirm that the ball rolls in
a straight line.
You are now ready to experience the new Breakthrough in Billiards rM and
Discover the Difference TMwith the
Thomas Aaron Ultimate Slate Pool Table TM.
clockwise Lower
Step
14 Final
page 21
Leveling
To Next Page
Loading...