Need help?Do you have a question about the Thomas SAF-T-LINER C2 and is the answer not in the manual?
Describes the location and information on the certification and data plates.
Provides step-by-step instructions for safely entering and exiting the bus.
Provides information on seat belt usage, inspection, and tether belts.
Explains the ignition switch positions and their functions.
Details the functions of the turn signal, wiper, and headlight controls.
Explains the operation of the cruise control and fast idle systems.
Describes the parking brake control valve and ABS system.
Explains the function and location of the main and cab power distribution modules (PDMs).
Describes when to shut down the engine immediately and the proper shutdown procedure.
Explains the principles of operation for EPA10 and newer engine aftertreatment systems.
Provides information on Diesel Exhaust Fluid (DEF) and its tank system.
Offers advice on safe driving practices, especially on slippery surfaces.
Explains the dual air brake system, including primary and secondary air systems.
Provides instructions on operating the vehicle's air brakes safely.
Explains the operation and features of the Meritor WABCO ABS.
Highlights the driver's responsibility for vehicle inspection before service.
Provides a checklist for daily pre-trip inspections and maintenance.
General safety precautions to follow when working on the vehicle.
Detailed procedures for performing daily vehicle inspections and maintenance.
Detailed procedures for performing weekly post-trip inspections and maintenance.
Provides detailed instructions for jumpstarting a vehicle with jumper cables.
Provides procedures for emergency shutdown and actions in case of accident or fire.
Details engine operation, starting, and shutdown procedures for propane engines.
Provides instructions and safety precautions for refueling with propane.
Lists and explains the various warning and indicator lights for LPG engines.
Details critical safety precautions for operating or repairing CNG vehicles.
Provides steps for fueling a CNG vehicle with a metered dispenser.
Instructions for starting the CNG engine, including ignition and instrument checks.
Describes the ICU3S panel for CNG engines and its features.
Lists and explains standard warning and indicator lamps for CNG engines.
Describes the location and information on the certification and data plates.
Provides step-by-step instructions for safely entering and exiting the bus.
Provides information on seat belt usage, inspection, and tether belts.
Explains the ignition switch positions and their functions.
Details the functions of the turn signal, wiper, and headlight controls.
Explains the operation of the cruise control and fast idle systems.
Describes the parking brake control valve and ABS system.
Explains the function and location of the main and cab power distribution modules (PDMs).
Describes when to shut down the engine immediately and the proper shutdown procedure.
Explains the principles of operation for EPA10 and newer engine aftertreatment systems.
Provides information on Diesel Exhaust Fluid (DEF) and its tank system.
Offers advice on safe driving practices, especially on slippery surfaces.
Explains the dual air brake system, including primary and secondary air systems.
Provides instructions on operating the vehicle's air brakes safely.
Explains the operation and features of the Meritor WABCO ABS.
Highlights the driver's responsibility for vehicle inspection before service.
Provides a checklist for daily pre-trip inspections and maintenance.
General safety precautions to follow when working on the vehicle.
Detailed procedures for performing daily vehicle inspections and maintenance.
Detailed procedures for performing weekly post-trip inspections and maintenance.
Provides detailed instructions for jumpstarting a vehicle with jumper cables.
Provides procedures for emergency shutdown and actions in case of accident or fire.
Details engine operation, starting, and shutdown procedures for propane engines.
Provides instructions and safety precautions for refueling with propane.
Lists and explains the various warning and indicator lights for LPG engines.
Details critical safety precautions for operating or repairing CNG vehicles.
Provides steps for fueling a CNG vehicle with a metered dispenser.
Instructions for starting the CNG engine, including ignition and instrument checks.
Describes the ICU3S panel for CNG engines and its features.
Lists and explains standard warning and indicator lamps for CNG engines.
General| Fuel Type | Diesel |
|---|---|
| Seating Capacity | Up to 81 |
| GVWR | Up to 33, 000 lbs |
| Category | School Bus |
| Manufacturer | Thomas Built Buses |
| Model | SAF-T-LINER C2 |
| Length | Up to 40 feet |
| Transmission | Allison 2500 PTS |
| Wheelbase Options | 217 inches |
| Engine Type | Cummins ISB6.7 |
To Next Page
