EasyManua.ls Logo

Thomas T-2820 series - User Manual

Thomas T-2820 series
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
SPECIFICATIONS
Voltage..................................................... 115 V. 60 HZ
Starting Voltage (min.)......................................... 95 V
Fuse Requirements .................................. 15 A (min.)
Safety Valve Setting ............... 140 PSIG (965.3 KPa)
Air Displacement ...................... 8.9 CFM (240.5 LPM)
Air Delivery .................................... 6.6 CFM @ 50 PSI
...........................................(186.9 LPM @ 345 KPa)
.....................................................5.5 CFM @ 80 PSI
.......................................... (155.7 LPM @ 552 KPa)
.................................................. 5.0 CFM @ 100 PSI
....................................... (141.6 LPM @ 689.5 KPa)
Amps at Working Pressure ............................. 13.5 A
Automatic Control ....................... Starts @ 100 PSIG
.............................................................. (689.5 KPa)
................................................... Stops @ 125 PSIG
.............................................................. (861.9 KPa)
Tank Sizes......................... 2 Gal. EACH (Total 4 Gal.)
........ (T-2820) 3.5 Gal. EACH (total 7 Gal.)
Weight.......................................T-2820WT ...... 77 Ibs.
....................................... T-2820ST ....... 74 lbs.
........................................... T-2820 .....119 lbs.
Cord ......................................................... 6 ft. (1.83 M)
PSI = Pounds Per Square Inch
KPa = Kilopascals
CFM = Cubic Feet Per Minute
LPM = Liters Per Minute
GENERAL DESCRIPTION
Performance in tandem with portability makes
the T-2820 our finest, most convenient tank
mounted compressor which is perfect for the
professional and serious do-it-yourselfer. This
compressor includes air storage tanks,and an
automatic pressure switch control.
APPLICATION
Ideal as primary or secondary air source for
almost any operation. Particularly suitable for
shops, garages; and factories where repetitive
use demands high reliability.
FOR SERVICE AND PARTS
For service contact the dealer from whom you
purchased the compressor.
To place parts orders: Provide the model data
located on the nameplate of the compressor
and call our national parts center. 1-800-323-
0620
Part No. 636936 Rev. W 12/00 © 1995Thomas Industries, Inc., Printed in
U.S.A.
All Rights Reserved
OWNER’S MANUAL and OPERATING INSTRUCTIONS for
Portable, Oilless Heavy Duty Air Compressor
WOB•L PISTON COMPRESSOR
1419 ILLINOIS AVE., SHEBOYGAN, WI 53081 USA (920) 457-4891
Model Model
Model Model
Model
T-2820 SERIEST-2820 SERIES
T-2820 SERIEST-2820 SERIES
T-2820 SERIES
12
Question and Answer IconNeed help?

Do you have a question about the Thomas T-2820 series and is the answer not in the manual?

Summary

General Description and Application

Application

Ideal as primary or secondary air source for shops, garages, and factories where high reliability is needed.

Service and Parts Information

Contact your dealer for service. Provide model data and call national parts center for orders.

General Maintenance and Service

Location and Setup

Operate compressor in a clean, dry, well-ventilated area, 12" from walls, keeping air filter clear.

Extension Cord Usage

Use a 3-wire grounding cord of appropriate gauge. Ensure it is in good condition.

Grounding Instructions

Proper grounding is essential to prevent electrical shock. Use a grounded outlet and plug.

Operation and Safety Precautions

Safety Valve and Thermal Overload

Do not tamper with the safety valve. The thermal overload protector shuts off the motor if it overheats.

Pressure Switch Operation

The on-auto-off lever controls the compressor, which starts below 100 PSIG and stops at 125 PSIG.

Operating Procedures

Connect accessory, turn on lever, let tank pressure build. Motor stops when ready. Restart auto.

Maintenance: Air Filter and Storage Tank

Clean air filter regularly. Drain storage tanks after each use to prevent corrosion.

Parts List and Diagrams

7 Gallon Tank Parts List

Detailed list of parts and their corresponding part numbers for the 7-gallon tank model.

Stack Tank Parts List

Detailed list of parts and their corresponding part numbers for the stack tank models.

Summary

General Description and Application

Application

Ideal as primary or secondary air source for shops, garages, and factories where high reliability is needed.

Service and Parts Information

Contact your dealer for service. Provide model data and call national parts center for orders.

General Maintenance and Service

Location and Setup

Operate compressor in a clean, dry, well-ventilated area, 12" from walls, keeping air filter clear.

Extension Cord Usage

Use a 3-wire grounding cord of appropriate gauge. Ensure it is in good condition.

Grounding Instructions

Proper grounding is essential to prevent electrical shock. Use a grounded outlet and plug.

Operation and Safety Precautions

Safety Valve and Thermal Overload

Do not tamper with the safety valve. The thermal overload protector shuts off the motor if it overheats.

Pressure Switch Operation

The on-auto-off lever controls the compressor, which starts below 100 PSIG and stops at 125 PSIG.

Operating Procedures

Connect accessory, turn on lever, let tank pressure build. Motor stops when ready. Restart auto.

Maintenance: Air Filter and Storage Tank

Clean air filter regularly. Drain storage tanks after each use to prevent corrosion.

Parts List and Diagrams

7 Gallon Tank Parts List

Detailed list of parts and their corresponding part numbers for the 7-gallon tank model.

Stack Tank Parts List

Detailed list of parts and their corresponding part numbers for the stack tank models.

Thomas T-2820 series Specifications

General IconGeneral
BrandThomas
ModelT-2820 series
CategoryAir Compressor
LanguageEnglish

Related product manuals