To Next PageTo Next Page
Need help?Do you have a question about the Thomson Neff WIESEL POWERLine WM40 and is the answer not in the manual?
Explains the importance of the manual for users and its accessibility.
Defines the authorized applications and limitations of the linear drive units.
Outlines the operator's responsibilities regarding safety, training, and checks.
Specifies requirements for competent and trained personnel operating the equipment.
Addresses the use of signs and written instructions to indicate risks.
Instructions on keeping, replacing, and always following signs and labels.
Prohibits unauthorized modifications and specifies spare part usage for safety.
Details conditions under which warranty claims are voided, including misuse.
Explains the meaning of standard safety symbols used within the manual.
Details the WM 40 model, its components, features, and applications.
Describes WM 60, WM80, WM120 models, their components, features, and applications.
Details WV60, WV80, WV120 models, emphasizing their use as feed units.
Instructions for mounting WM series units using integrated guideways.
Specific steps for mounting linear drive units with extended lengths.
Guidelines for mounting WV series units using external guideways.
Procedures for setting travel limits and adjusting limit switches.
Explains the function, installation, and adjustment of inductive limit switches.
Details the use, installation, and adjustment of mechanical safety limit switches.
Information, technical data, and assembly steps for the RT40 belt drive.
Details the RT60/RT80 belt drive, including technical data and assembly.
Step-by-step guide for assembling the RT60/RT80 belt drive system.
Instructions for properly tightening the RT60/RT80 belt drive components.
Overview of the PRT40 parallel belt drive system and its components.
Detailed instructions for assembling the PRT40 parallel belt drive.
Steps for correctly tensioning the PRT40 parallel belt drive.
Procedures for mounting the drive motor, including coupling and alignment.
Details on lubrication types, intervals, and quantities for different models.
Instructions for retensioning the cover strip on specific WM/WV60, 80, 120 models.
Detailed steps for replacing worn-out cover strips on various models.
Procedure for replacing a cover strip that is still fitted on the unit.
Procedure for replacing a cover strip that is no longer fitted on the unit.
Provides technical specifications for WM 40, 60, 370, 500 models.
Provides technical specifications for WM 80, 80-370, 120 models.
Provides technical specifications for WV 60, 80, 120 models.
Specifies torque values for various screws, KAO brackets, and tensioners.
Exploded view and list of spare parts for the WM40 model.
Exploded view and list of spare parts for WM60, WM80, WM120 models.
Exploded view and list of spare parts for WM60-370, WM80-370 models.
Exploded view and list of spare parts for WV60, WV80, WV120 models.
General| Brand | Thomson Neff |
|---|---|
| Model | WIESEL POWERLine WM40 |
| Category | Controller |
| Language | English |
