THOMSON G70B-PF - Button Descriptions; Using Your Digital Picture Frame

To Next Page

To Previous Page

Button Descriptions

MODE/SETTINGS/EXIT

NEXT/COPY

PLAY/PAUSE/ON/OFF

Using Your Digital Picture Frame

Install the stand for tabletop display, and connect the AC-DC power adapter.

Insert a memory card in the digital picture frame (with the card’s electrical

contacts toward the back of the unit). If the power is off, press the PLAY/PAUSE

button to turn the frame on. A slide show will begin automatically.

To turn the frame off, press and hold the PLAY/PAUSE button for about three

seconds. To turn it on again, press the PLAY/PAUSE button briefly.

To pause the slide show, press the PLAY/PAUSE button briefly. The sign of

pause will appear on the screen briefly, and the slide show will be stopped. The

current photo will remain on the screen until PLAY/PAUSE button is pressed, at

which time the slide show will resume.

To display the next or previous picture, press the NEXT button or the

PREVIOUS button .

To search for pictures in the memory card, press the MODE button briefly.

The first six pictures in the card will be displayed. Press the

button or

PREVIOUS button to select a picture and then press to play the picture.

To display the next six pictures, press NEXT button a few times until the next six

pictures are displayed. 3

To adjust frame settings, press MODE button to display six pictures on the

screen and then press MODE button again to display all adjustable parameters of

the frame where you can adjust Image Display, Slideshow Effect, Slideshow

Interval, Rotate, Copy to Favorite, OSD Language, Brightness, etc. When all

the desired parameters are selected, press to confirm and exit from the

interface.

To copy a picture into the internal memory of the frame, press and hold the

NEXT button for about three seconds at slideshow mode. press to copy

the picture into internal memory or press to exit from the interface.

Note: the internal memory can store 4-6 pictures and depends on the picture size.

To delete a picture from the internal memory, remove the memory card from the

frame first, and then press and hold NEXT button for about three seconds.

then press to confirm.

To play pictures in the optional USB host, plug the USB host to the frame and

the frame will automatically start slideshow of the pictures in the USB host.

To display pictures in the internal memory, turn off the frame, remove USB

host and memory card from the frame and then turn on the frame again.