MAINS OUTLET POWER
SUPPLY
You can power your CD player with the
supplied AC/DC adapter. Refer to the table
for details of the operating voltage of the
adapter supplied with your unit.
AC/DC adapter is purposed for indoor use
in dry rooms only. Remove the jack from
the device to use it with the batteries.
Note : Power is fed to the unit even when
it is not functionning. To cut the power
supply off, the AC/DC adapter must be
unplugged.
CAR (DC) POWER SUPPLY
ADAPTER (for RP2375/RP2365 only)
Plug the car (DC) power supply adapter
into the DC in 4,5V jack at the rear/side of
the CD player & then into the cigarette
lighter receptacle in your car.
BATTERIES POWER SUPPLY
Refer to the table for details of the bat-
teries required to operate your unit.
Recharge function (Thomson Models)
—
To charge Ni-Cd batteries (not included):
Insert 2 rechargeable batteries in the com-
partment. Turn the switch to the ON posi-
tion at the back of the unit. Connect the
main adapter. The batteries take about
eight hours to become fully charged if the
player is not operating. Important : If you
use your CD player with non rechargeable
batteries, turn OFF the switch at the back
of the unit in order to prevent any dam-
age to the unit or batteries.
THE CD PLAYER
EN
4
Model Number Adapter Batteries
RP 2360 / RP 2365 5-4079A AAx2
(120V 60 Hz) (Not Included)
RP 2370 / RP 2375 5-4079A/B AAAx2
(120V 60Hz) (Included)
LAD 870 5-4090A AAx2
(230V 50Hz) (Included)
LAD 960 5-4090A AAAx2
(230V 50Hz) (Included)
LAD 870U A 30460B AAx2
(230V 50Hz) (Included)
LAD 960U A 30460B AAAx2
(230V 50Hz) (Included)
RP 2360EA / RP 2365EA 5-4092B AAx2
(240V 50Hz) (Not Included)
RP 2370EA / RP 2375EA 5-4092B AAAx2
(240V 50Hz) (Not Included)
To Next Page
