(fig. 4)
(fig. 8)
(fig. 5)
(fig. 6)
(fig. 7)
MAX
5. Replace the water tank by aligning
the marks on the back of the
appliance. (fig. 4)
6. Place the pre-soaked water filter
cartridge into the appliance’s tank
(fig. 5).
7. Pour water into the water tank
(fig. 6) up to the MAX mark (fig. 7),
making sure that water does not
get into the air passages.
8. Replace the water tank lid by
aligning the marks on the top of the
air passage. (fig. 8)
9. Replace the water tank lid by
aligning the marks on the top of the
air passage.
36 User manual
To Next Page
Loading...