(fig. 4)
(fig. 5)
(fig. 6)
(fig. 7)
(fig. 8)
7. To clean the pre-filter from dust
and large particles, use a vacuum
cleaner with a soft attachment.
(fig. 4)
8. Install a new or cleaned filter into
the appliance’s enclosure. (fig. 5)
9. Install the bottom cover by aligning
the marks on the back of the
appliance. (fig. 6)
10. Tighten the bottom cover fixing
screw by turning it clockwise until
the stop. (fig. 7)
11. Turn the appliance over and place
it on a flat surface.
12. Install the water tank by aligning
the marks on the back of the
appliance. (fig. 8)
38 User manual
To Next Page
Loading...