E-DOC-CTC-20080118-0003 v3.0
26
4 Wireless
3 Under Wireless, click your access point.
4 The Wireless Access Point page appears.
5 In the Location bar, click Configure.
6 Under Security, you can change the Encryption. If you want to use:
WPA-PSK Encryption, continue with “4.3.1 Configuring WPA-PSK Encryption” on page 27.
WEP Encryption, continue with “4.3.2 Configuring WEP Encryption” on page 28.
Your access point will be listed in the following format: “WLAN:<Network Name> (<Actual
Speed>)”. For example, WLAN: Thomson83C7C7 (54Mbps).
To Next Page
