EN-14
C
LEANING BEER TAP MECHANISAM
P
lease clean before the first use or after no use in long time. Clean the
whole beertender with dry cloth:
1. Use warm water with cleaning kit.
2. Connect the end of the piercing pin. Push the water into the pin to
clean the tube. Push the water our from the tube at the other end.
Repeat this process with warm water at least 3 times.
3. Disassemble the tap to clean.
Figure 16
Warning:
Never put the tap mechanism parts in the washing machine or dishwasher;
Never use any detergent to clean
T
his connector must connect
with cleaning bottle
Please open the tap when you are
To Next Page
Loading...
