FR-10
OPERATING YOUR DEVICE
1. Open the tank lid, add water to the tank (water should be
added according to demand, 0.1L water is needed for one
carafe; 0.2L water is needed for two carafes… 0.6 L of water is
needed for six carafes, etc.), close the tank cover correctly.
2. Open the top cover, add the coffee bean (a flat spoon of
coffee bean (about 5g)) into the grinder, the coffee bean
should not exceed the MAX sign (about 40 g); close the top
cover.
3. When the power is connected, the on/off button light flashes
twice and then disappears, the whole machine is on standby.
4. Press the ON/OFF button once (turn on the power), the button
light is on (the light flashes), then press the ON/OFF button and
the button light turns off.
3. After pressing the ON/OFF button, press , the lights of the
two buttons light up normally, the motor starts to work. After the
coffee bean is ground, the motor stops working (motor working
time is about 35 seconds); The heating tube starts working after
2 seconds, it starts making coffee. When finished, the heat is
retained automatically. Food is automatically switched off after
40 minutes, and the ON/OFF LEDs are off; (this is the
process to grind 1-3 cups of coffee beans and boil 1-3 cups of
coffee, this symbol means grain of coffee about 20g)
4. After pressing the ON/OFF button, press
, the two button
lights light up normally, the motor starts working (the motor
working time is about 70 seconds. After the coffee bean is
ground, the motor stops working; the heating tube starts
working after 2 seconds, it starts to make coffee. When finished,
the heat is retained automatically. Food is automatically
switched off after 40 minutes, and the ON/OFF LEDs
are off; (this is the process to grind 4-6 cups of coffee beans
and boil 4-6 cups of coffee. This symbol means the coffee
bean is about 40g).
7. Afte
r pressing the ON/OFF button, press , (button to make
coffee with ground coffee), the two button lights light up
To Next Page
Loading...
