PRODUCT INFORMATION
The steam nozzle emits a stream of hot steam capable of
penetrating materials. The mop head, jet nozzle and multi-function
head attach to the steam nozzle.
The water tank is the tank containing the water before it is
transferred to the boiler where it is transformed into steam. The
water tank holds 380 mL of water.
The water tank cap covers the water tank fill hole and should be
removed before filling the water tank with water.
The power indicator(3) illuminates when the steam control dial is set
to one of the three steam intensity settings. It indicates whether the
device is on and heating up.
The steam control dial turns the unit on or off. It is used to select the
desired steam intensity (three settings available - HIGH and LOW).
The ignition handle is convenient to assemble and disassemble to
get the device ready as quickly as possible.
Cord clips provide a safe and convenient way to store the power
cord when not in use. (under the hook)
The handle is comfortable when using the extension tube.
The two microfiber wipes attach to the mop head and are used to
clean scratches and stains from hard surface floors. Microfiber
fabrics are reusable and machine washable.
NOTE : Microfiber wipes are designed to absorb and collect dirt. For
best results, we recommend you vacuum the floor before mopping.
The precision nozzle attach to the precision nozzle and are
designed to remove stubborn stains. You have a nylon round brush
for brushing (a carpet, for example).
EN-8
To Next Page
Loading...