THOMSON THSM21510 - Page 52

Limestone formation
in the unit.
See the Limescale Removal section of
this manual
and follow the removal
procedure.
Liquid water is
mixed with the
vapor stream.
The steam control
dial is in the UP
position.
On the HIGH setting, a small amount of
water may be emitted with the steam.
Reducing the steam
control dial
setting to MEDIUM or LOW will also
reduce the presence of liquid water in
the steam.
A clicking sound
can be heard from
the water tank.
This noise is
produced by the
copper ball
connected to the
end of the water
tube in the water
tank.
The copper ball is present precisely to
help the unit use all the water in the
tank more efficiently.
EN-
24