To Next PageTo Next Page
Need help?Do you have a question about the THOMSON VPH7090 - annexe 1 and is the answer not in the manual?
Specifies use on AC mains (220-240V, 50Hz) and prohibits DC connection.
Warns against using severed plugs and highlights safety components in the detachable lead.
Details using a 3A fuse (ASTA/BSI approved) and securely replacing fuse covers.
Lists requirements for warranty, authorized repairs, and prohibits self-tampering.
Covers voltage compliance, heat/field avoidance, and ventilation clearance.
Explains selecting 'tv' mode and using remote keys for TV functions like power, channel, volume.
Details steps to program TV codes using the menu and brand code list.
Lists TV brands and their corresponding 3-digit codes for remote control.
Describes remote keys for recording, VCR on/off, VPS, status, NAVICLICK, subtitles, and navigation.
Guides on programming VCR/DVD codes, including unplugging other devices and trying multiple codes.
Identifies front panel controls for power, channel, sound, playback, eject, and recording.
Guides on inserting tape, selecting sources (AV), choosing SP/LP length, and starting pause-record.
Explains how to set a specific end time for a recording using digital keys.
Describes recording the current TV channel instantly using the S.O.S. record key.
Details accessing the TV guide, scrolling, and selecting programmes for recording.
Guides on checking, modifying, or cancelling programmed recordings via the TIMER REVIEW menu.
Guides on loading blank tapes and selecting 'New Tape' to store them in the library.
Details the 4 functions: Play back title, Go to title, Edit title, and Delete title.
Guides on programming recordings using Video Plus+ codes via the dedicated menu.
Explains setting up recordings via the RECORD TIMER menu, including channel and time details.
Guides on selecting 'Record timer', entering channel/AV, start/stop times, and date.
Details ticking boxes for VPS/PDC recording and permanent subtitle recording.
Explains receiving/recording NICAM and analogue stereo, and selecting sound tracks.
Details adjusting sound levels for channels, especially in stereo, using Auto or Manual modes.
Explains replacing mono track sound on VHS tapes using external sources or microphones.
Guides on positioning tape, pausing, and selecting sound input (Au3, Ru1/Ru2/Au4, MIC).
Explains precise replacement of existing recording parts with new sequences.
Guides on loading tape, selecting source, positioning, resetting counter, and starting insertion.
Explains choosing and viewing sequences sequentially, and recopying them using automatic splicing.
Troubleshooting for power-on failures and non-responsive remote controls.
Specifies use on AC mains (220-240V, 50Hz) and prohibits DC connection.
Warns against using severed plugs and highlights safety components in the detachable lead.
Details using a 3A fuse (ASTA/BSI approved) and securely replacing fuse covers.
Lists requirements for warranty, authorized repairs, and prohibits self-tampering.
Covers voltage compliance, heat/field avoidance, and ventilation clearance.
Explains selecting 'tv' mode and using remote keys for TV functions like power, channel, volume.
Details steps to program TV codes using the menu and brand code list.
Lists TV brands and their corresponding 3-digit codes for remote control.
Describes remote keys for recording, VCR on/off, VPS, status, NAVICLICK, subtitles, and navigation.
Guides on programming VCR/DVD codes, including unplugging other devices and trying multiple codes.
Identifies front panel controls for power, channel, sound, playback, eject, and recording.
Guides on inserting tape, selecting sources (AV), choosing SP/LP length, and starting pause-record.
Explains how to set a specific end time for a recording using digital keys.
Describes recording the current TV channel instantly using the S.O.S. record key.
Details accessing the TV guide, scrolling, and selecting programmes for recording.
Guides on checking, modifying, or cancelling programmed recordings via the TIMER REVIEW menu.
Guides on loading blank tapes and selecting 'New Tape' to store them in the library.
Details the 4 functions: Play back title, Go to title, Edit title, and Delete title.
Guides on programming recordings using Video Plus+ codes via the dedicated menu.
Explains setting up recordings via the RECORD TIMER menu, including channel and time details.
Guides on selecting 'Record timer', entering channel/AV, start/stop times, and date.
Details ticking boxes for VPS/PDC recording and permanent subtitle recording.
Explains receiving/recording NICAM and analogue stereo, and selecting sound tracks.
Details adjusting sound levels for channels, especially in stereo, using Auto or Manual modes.
Explains replacing mono track sound on VHS tapes using external sources or microphones.
Guides on positioning tape, pausing, and selecting sound input (Au3, Ru1/Ru2/Au4, MIC).
Explains precise replacement of existing recording parts with new sequences.
Guides on loading tape, selecting source, positioning, resetting counter, and starting insertion.
Explains choosing and viewing sequences sequentially, and recopying them using automatic splicing.
Troubleshooting for power-on failures and non-responsive remote controls.
General
