Need help?Do you have a question about the Thonet & Vander BOHNE and is the answer not in the manual?
First remove one earphone from the charging cradle, after 2 seconds remove the other to switch them on.
When removed, a red and blue light alternately flashes. Wait for one to blink only in blue to pair with the device.
Left earphone lowers volume/backward tracks. Right earphone increases volume/forward tracks. Keep finger to adjust volume.
General| Driver Type | Dynamic |
|---|---|
| Driver Size | 40 mm |
| Frequency Response | 20Hz-20kHz |
| Impedance | 32 Ohm |
| Cable Length | 1.2 m |
| Connector | 3.5mm |
| Weight | 200 g |
| Color | Black |
| Ear Coupling | Circumaural |
To Next Page