COMMISSIONING THE COOKTOP
• The electric cooktop must be installed by qualified installer.
• Do not place cooktop next to open fires, heaters or other sources of heat.
• Make sure that the mains connection cable is not damaged or squashed beneath the
cooktop
• Make sure that the mains connection cable does not come into contact with sharp
edges and/or hot surfaces.
• The cooktop should be connecting to the power source which is sufficient secured.
• Do not install the cooktop above a dishwasher or washing-machine, because the elec-
tronic circuits do not come into contact with steam or moisture which could damage
them.
• Before connecting the cooktop, check whether the voltage indicated on the type plate
corresponds to the voltage supply in your home. A wrong connection may lead to grave
damage on the cooktop and injured.
• The cooktop surface is made of temperature-resistant ceramics. If it is damaged,
even if this concerns only a small tear, disconnect the cooktop from the power supply
immediately and contact the customer service.
• We recommend not placing any metal Kitchenware, cookware or pan lids, knives or
other metal objects on the cooktop. These may heat up when the cooktop is turned on.
• Do not place any magnetically objects like credit cards, cassettes etc. on the glass
surface while the cooktop is in operation.
• In order to avoid overheating, do not place any aluminium foil or metal plates on the
cooktop.
• Do not insert any objects like wires or tools into the ventilation slots.
ATTENTION: THIS MAY CAUSE ELECTRIC SHOCKS.
• Do not touch the hot surface of the cooktop.
• Do not heat up any unopened tins on the cooktop, or a heated tin could be exploded;
therefore you must remove the tin lid under all circumstances beforehand.
7
To Next Page
Loading...
