Thorlux Lighting SmartScan Touch

To Next Page

21LFT41813 Issue 1 PN 3853A Sept 22

15 30

NOTE: Pattress box

single gang depth

min. 35mm for

mains versions

only (not supplied)

81 71

15 30

NOTE: Pattress Box

single gang depth

min. 35mm for wall

mounted versions only

(Not supplied)

81 71

OFF

Programmable

scenes

On/ECO

Brightness:

100%

75%

50%

25%

10%

IK10

IP56

III

IP40

IP54

IP67

IP68

IP65

IP66

IP60

IP64

IP54

IP55

IP50

IP53

IP43

IP44

IP42

IP30

IP40

IP23

IP20

IP22

SmartScan Touch

BATTERY POWERED SS20212 & MAINS POWERED SS20213

DIMENSIONS

FUNCTIONS

■

The SmartScan Touch allows the user to control a group of SmartScan luminaires.

■

Simply touch the desired function.

■

The mains powered SmartScan Touch has a wireless connection that

allows control of the luminaires using the Thorlux SmartScan App.

■

Wireless communications are disabled as default, therefore the

SmartScan Touch must be commissioned before use.

To enter Set Up Mode press any button for 10

seconds. A green LED will illuminate to conrm

Set Up Mode.

The SmartScan Touch can now be programmed

using the SmartScan Programmer (please see

page 4 for programming commands).

Set Up Mode will exit after 60 seconds of inactivity.

OPERATING INSTRUCTIONS

Max. 40m

* 922MHz Max. 10m

NOTE: Distance is reduced if walls are between

SmartScan Touch and luminaires.

Max. 0.5m

POSITIONING SMARTSCAN PROGRAMMING/TESTING

SMARTSCAN TOUCH

Search for Thorlux SmartScan

Other manuals for Thorlux Lighting SmartScan Touch

Installation Details2 pages

Need help?

Do you have a question about the Thorlux Lighting SmartScan Touch and is the answer not in the manual?

Summary

SmartScan Touch Overview

Dimensions

Physical dimensions of the SmartScan Touch device, including width, height, and depth.

Operating Instructions

Instructions on how to operate the SmartScan Touch for controlling luminaires and using the SmartScan App.

Functions

Explains how to enter Set Up Mode and use programmable scenes and On/ECO functions.

Positioning

Guidance on the optimal positioning of the SmartScan Touch for wireless communication with luminaires.

SmartScan Programming and Testing

Information related to programming and testing the SmartScan Touch device.

Installation Guide

Removing the Touch Panel

Instructions on how to safely remove the touch panel from its mounting.

Battery Placement and Mains Wiring

Details on placing batteries or wiring the mains power connection for the device.

Mounting Options

Adhesive Pad Mounting

Using adhesive pads for mounting the battery-powered SmartScan Touch.

Wood Fixing Mounting

Mounting the battery-powered SmartScan Touch using wood screws.

Pattress Box Mounting

Installing the SmartScan Touch in a pattress box for battery and mains powered versions.

Programming with SmartScan Programmer

Programmer Device

Details about the SmartScan Programmer device used for configuration.

Programmer Display

Explanation of the information shown on the SmartScan Programmer's LCD display.

Setting Building and Group Addresses

Guide to setting building and group addresses using the SmartScan Programmer.

RF Transmit Configuration

Instructions for enabling or disabling RF transmit functionality via the programmer.

Exiting Programming Mode

How to exit the programming mode on the SmartScan Programmer.