Thoro-Matic ABS1500 User Manual

READ THIS BOOK
This operator’s book has important information for the
use and safe operation of this machine. Read this book
carefully before starting the machine. Keep this book
and tell all operators to read the book. If you do not
follow the instructions, you can cause an injury or dam-
age equipment, furniture or buildings.
For new books write to:
Thoro-Matic
2259 South Sheridan Road
Muskegon, MI 49442
Carefully inspect all components to ensure that there is
no concealed freight damage. If such damage is dis-
covered, file a “CONCEALED DAMAGE REPORT” im-
mediately with the delivering carrier.
The contents of this manual are based on the latest
product information available at the time of publication.
Thoro-Matic reserves the right to make changes or im-
provements to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL_______________________________
SERIAL NUMBER______________________
PART NUMBER _________________________
DATE PURCHASED ____________________
OPERATING & MAINTENANCE
INTRODUCTION INSTRUCTIONS
UHS BURNISHER
ABS1500 1500RPM

Thoro-Matic ABS1500 Specifications

General

Model	ABS1500
Category	Floor Machine
Brand	Thoro-Matic
Speed	175 RPM
Cord Length	50 ft
Power Source	Electric
Pad Size	15 in
Brush Size	15 inches

Summary

Introduction

Read This Book

Important information for safe operation and machine use. Keep book for operators.

Record Machine Information

Section to log model, serial, and purchase date for convenient reference.

Important Safety Instructions

Read All Instructions Before Use

Essential to read all warnings and instructions before operating the machine to prevent injury.

Grounding Instructions

Details proper grounding for electrical safety, preventing shock, and using appropriate outlets.

Extension Cord Usage

Guidelines for using approved extension cords with three-prong grounding type plugs for safe operation.

Operating Procedures

Preparation

Steps to prepare the machine for operation, including floor area clearing and pad selection.

Operation

Instructions on how to start the machine, move it forward, and control pad pressure.

Maintenance

Procedures for cleaning, checking cords, motor, belt tension, and carbon brushes.

Warranty Policy

Limited Warranty Details

Details warranty period, covered parts, labor, and specific exclusions for defects.

Obtaining Warranty Service

Procedure for returning the machine or parts for warranty repair, including delivery and contact info.