What to do if Thrane&Thrane Transceiver has no communication?
If your Thrane&Thrane Transceiver isn't communicating, you should check the antenna installation, the antenna cable, and the hand microphone and its cable.
How to fix Thrane&Thrane Transceiver that will not turn on?
If your Thrane&Thrane Transceiver will not turn on, check if power is present. Also, check the fuse located in the power connector and the performance of the power supply, if one is connected.
Why power supply status cannot be monitored on Thrane&Thrane SAILOR 6249 Transceiver?
You can only monitor the power supply if the Thrane&Thrane Transceiver is powered by a SAILOR 6081 Power Supply Unit and Charger. If you are not using this power supply, set 'Monitor' to 'disabled' in Setup, Power Supply.
Provides a description of the SAILOR 6249 VHF Survival Craft, its features, and capabilities.
Details on mounting the VHF radio as desktop, overhead, or flush-mounted unit.
Detailed information on all connectors (front/rear panel, ACC, AUX, CTRL, LAN, Power).
Information on how to get technical support and use the troubleshooting guide.
Step-by-step instructions for replacing fuses in the power connector and power converter.
Detailed technical specifications for the SAILOR 6249 VHF Survival Craft unit.
General| Temperature Range | -25°C to +55°C |
|---|---|
| Modulation | GMSK |
| Power Supply | 12 V DC / 24 V DC |
| Operating Modes | Simplex |
| Output Power | 25 W |
To Next Page
