Thrane&Thrane TT-3000SSA User Manual

MARINE SSAS
GPSDK/TT SSAS Confi g. 1A-300904
Confi guration Guide
Thrane & Thrane TT-3000SSA
September 30th 2004

Thrane&Thrane TT-3000SSA Specifications

General

Brand	Thrane&Thrane
Model	TT-3000SSA
Category	Security System
Language	English

Summary

Required Commissioning and DNID Registration of TT-3000SSA

Prerequisites

Basic TT-3000SSA Configuration

Log In As System Administrator

Details the process of logging into the TT-3000SSA as the system administrator, including initial password.

Enter IMN (Inmarsat Mobile Number)

Explains how to input the Inmarsat Mobile Number (IMN) into the TT-3000SSA using the 'se -u' command.

Roaming on All Four Ocean Regions

Configures the TT-3000SSA to allow roaming on all four Inmarsat satellite ocean regions via 'se -o' command.

DNID Configuration

Maritime Position Format with Extended GPS Precision Set-Up

Sets the default DNID format to transmit maritime position reports with extended GPS information.

Predefine DNIDs for All Four Ocean Regions

Enters DNID and Member numbers for each Ocean Region, ensuring global coverage for the device.

Group the DNIDs

Groups the predefined DNIDs for all four ocean regions, essential for device registration.

Ship Security Alert Message Configuration

SSA Message Set-Up Introduction

Introduces the programming of SSA Messages to three different recipients as per ISPS Code requirements.

Set LES Used to Transmit SSA Messages

Configures the LES (Land Earth Station) used to transmit Ship Security Alert (SSA) messages.

Set SSA Message Recipient to LocPoint

Sets LocPoint as a recipient for SSA messages, typically for relay or monitoring purposes.

Set Other SSA Message Recipients

Allows configuration of additional recipients for SSA messages beyond LocPoint.