THRONMAX ZOOM S3 User Manual

INSTALLATION MANUAL
Model: S3
1kg
(2.2lbs)
RATED
Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of
purchase for a replacement.
Check that the product is secure and safe to use at regular intervals (at least every three months).

THRONMAX ZOOM S3 Specifications

General

Microphone Type	Condenser
Polar Pattern	Cardioid
Frequency Response	20Hz - 20kHz
Sample Rate	48kHz
Bit Depth	16-bit
Max SPL	120dB
Connectivity	USB
Connection	USB
Compatibility	Windows, macOS
Included Accessories	USB cable, shock mount, pop filter
Sensitivity	-36dB ± 2dB (0dB = 1V/Pa at 1kHz)

Summary

Installation and Safety Guidelines

General Precautions and Warnings

Key warnings and precautions for safe installation and operation, including weight limits and proper tools.

Pre-installation Checklist and Maintenance

Instructions for verifying parts before installation and a schedule for regular product maintenance checks.

Assembly Steps

Clamping Base Assembly

Detailed steps for assembling the clamp base and attaching it to a surface.

Boom Arm Connection

Instructions for connecting the main boom arm to the previously assembled clamping base.

Final Arm Configuration

Visual guide to the fully assembled broadcast boom arm in its operational state.