Thrustmaster Ferrari F1 Wheel Add-on User Manual

2/9
UPDATING THE FIRMWARE FOR YOUR T500 RS BASE
1. Leave the “GT” wheel installed on its base (and do not install the “Ferrari F1” wheel for the time
being).
2. On PC, download and install the "software pack" available here: http://ts.thrustmaster.com
(under
“Online Support – FAQ/PC/Wheels/Ferrari F1 RS” or “PS3/Wheels/Ferrari F1 RS”).
3. Carry out the firmware update (the update procedure is also available in PDF format in the same
location on the website, for more information).
The new firmware is compatible with the 2 different T500 RS wheels
= “GT” wheel + “Ferrari F1” wheel
REMOVING THE “GT” WHEEL FROM ITS BASE
1. Unplug the base's USB cable before carrying out this procedure.
2. Turn the “GT” wheel 180° (viewed from the front, the GT logo should be upside down), in order to
access the “small attachment screw (B)” located on the ring of the “Thrustmaster Quick Release
(A)”.

Thrustmaster Ferrari F1 Wheel Add-on Specifications

General

Device type	Special
Buttons quantity	8
Gaming control technology	-
Gaming platforms supported	Playstation 3
Gaming control function buttons	D-pad
Connectivity technology	Wired
Plug and Play	Yes
Product color	Black

Weight and Dimensions

Weight	1295 g