3/14
PLAYSTATION® 3
INSTALLATION ON PLAYSTATION® 3
1. Set your receiver’s USB selector to the “PS3” position.
2. Connect the USB connector to USB port #1 on the console.
3. Switch on your console.
4. Switch on your gamepad using the POWER ON/OFF switch (15).
5. Once a connection has been established: start up your game.
You are now ready to play!
PLAYSTATION® 3 MODE
“AUTOMATIC PRESET” CONFIGURATION - PLAYSTATION® 3
PS3 mode Red HOME button
Here:
• “Optical wheel” associated with “Left/Right”
direction on left mini-stick
• “Right trigger” associated with progressive
“R2” button
• “Left trigger” associated with progressive “L2”
button
USING THE “HOME” BUTTON (6)
Your gamepad’s “HOME” button allows you to exit games, access menus and directly switch off your
PlayStation®3 system.
IMPORTANT NOTES FOR PLAYSTATION® 3
- The USB selector on your receiver (11) must always be set to “PS3” before connecting the receiver.
- In “1 Player” mode: If your official gamepad is powered on, you must switch it to “gamepad port 2” in order
for your “Run’N’ Drive” gamepad to be functional.
- On PlayStation® 3, the “Run’N’ Drive” gamepad is only compatible with PlayStation® 3 games (and will
not work with PlayStation® 2 games) and does not feature a motion sensor.
To Next Page
Loading...
Need help?
General
