EasyManuals Logo

Thrustmaster RUN'N'DRIVE WIRELESS 3-IN-1 User Manual

Thrustmaster RUN'N'DRIVE WIRELESS 3-IN-1
99 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
8/14
PROGRAMMING THE OPTICAL WHEEL AND TRIGGERS
The 2 directions of the optical wheel and the 2 progressive triggers can be programmed using the
MAPPING button (7).
Examples of possible applications:
Programming a button, direction of a mini-stick or of the D-Pad:
- onto the “up” or “down” direction of the optical wheel
- onto the “right trigger” or “left trigger
Programming procedure on optical wheel and triggers:
Steps Action
PRESET button
color
1 Enable “MANUAL PRESET” (8) by pressing the button. Lit up green
2 Press and release the MAPPING button (7). Lit up red
3 Press and release the button or direction to program. Flashes red
4
Raise or lower the direction on the optical wheel
or press the trigger onto which you wish to place your function.
Lit up green
Your “MANUAL PRESET” is now enabled and up to date
(with your programming applied to the optical wheel or triggers)
SWITCHING BUTTONS/MINI-STICKS/D-PAD
All progressive buttons (on PS2 and PS3) or digital buttons (on PC), as well as directions of the mini-
sticks and of the D-Pad can be switched using the MAPPING button (7).
Examples of possible applications:
- Switch buttons between themselves
- Switch the 2 mini-sticks
(in this case, you will to have to map the 4 directions of the first mini-stick to the 4 directions of the
second mini-stick)
- Switch the D-Pad with a mini-stick
(in this case, you will have to map the 4 D-Pad directions to the 4 directions of the mini-stick in
question).
Procedure for switching buttons, mini-sticks and D-Pad
- Does not work for the triggers.
- Works for the optical wheel but only on PC and in “7 axes” mode.
Steps Action
PRESET button
color
1 Enable “MANUAL PRESET” (8) by pressing the button. Lit up green
2 Press and release the MAPPING button (7). Lit up red
3 Press and release the button or direction to switch. Flashes red
4
Press and release the button or direction onto which you wish to
place your function.
Lit up green
Your “MANUAL PRESET” is now enabled and up to date (with the 2 functions switched).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thrustmaster RUN'N'DRIVE WIRELESS 3-IN-1 and is the answer not in the manual?

Thrustmaster RUN'N'DRIVE WIRELESS 3-IN-1 Specifications

General IconGeneral
BrandThrustmaster
ModelRUN'N'DRIVE WIRELESS 3-IN-1
CategoryVideo Game Controller
LanguageEnglish

Related product manuals