Do you have a question about the Thrustmaster TX Leather Edition and is the answer not in the manual?
Compatibility | Xbox One, Xbox Series X|S, PC |
---|---|
Material | Leather-wrapped wheel |
Type | Racing wheel |
Connectivity | Wired |
Connection | USB |
Wheel Diameter | 28 cm |
Force Feedback | Yes |
Rotation Angle | 270° to 900° |
Buttons | Xbox buttons, D-pad |
Paddle Shifters | Yes |
Power Supply | External power supply |
Pedals | 3-pedal set (accelerator, brake, clutch) |
Details internal power supply types (220-240V and 100-125V) for the racing wheel.
Details external power supply type (110-240V) for the racing wheel.
Safety guidelines to prevent electric shock, including proper storage and cable handling.
Instructions for proper ventilation of the racing wheel base to prevent overheating.
Warnings about potential injuries from force feedback and repetitive motions, with advice on breaks.
Safety warnings about the pedal set, focusing on avoiding finger pinching during play.
Instructions for mounting the racing wheel onto a flat surface using the attachment system.
Steps to mount the racing wheel base onto a cockpit shelf using screws.
Visual guide for attaching and detaching the racing wheel, showing screw directions.
Diagram showing button assignments for Xbox One controllers.
Diagram illustrating button assignments for PC controllers.
Guide to check and update the racing wheel's firmware via the Thrustmaster website.
Step-by-step connection and setup instructions for Xbox One.
Explanation of the automatic self-calibration for racing wheel and pedals.
Steps to resolve incorrect calibration by reconnecting cables and restarting the console.
Ensures correct detection by keeping the pairing device in Kinect's field of vision.
Information about the temperature sensor that may shut down the device if it overheats.
Explains swapping accelerator/clutch pedals using MODE button and indicator light.
Points to Thrustmaster website for more MODE button and indicator light details.
Directs users to the Thrustmaster website for additional help files and FAQs.
Safety advice to keep pedal set away from children and avoid finger pinching.
Details automatic pedal calibration and precautions during the process.
Instructions for attaching the pedal set to a cockpit support plate using screws.
Guide on adjusting accelerator pedal height using an Allen key and screws.
Instructions for adjusting spacing between pedals using an Allen key and screws.
Instructions for adjusting pedal inclination by rotating the plastic head support.