INSTALLATION ON PC USING THE RJ12/USB ADAPTER
1. Connect the TFRP pedal set’s male RJ12 connector (4) to the female RJ12 connector (6)
on the adapter (5).
2. Set the adapter’s selector switch (8) to the AIRPLANE position
.
3. Go to https://support.thrustmaster.com/. Select Joysticks / TFRP T.Flight Rudder
Pedals, then select Drivers. Download and install the PC driver and its custom Windows
Control Panel-based interface.
4. Once the PC driver has been installed, connect the adapter’s USB connector (7) to one of
the USB ports on your PC.
5. The adapter’s LED (9) lights up in GREEN.
6. To access the Control Panel, select:
- Start / All Apps / Thrustmaster / Control Panel or Control Panel (in Windows® 10 / 8.1 /
8); or
- Start / All Programs / Thrustmaster / Control Panel or Control Panel (in Windows® 7)
The Game Controllers dialog box is displayed.
The accessory appears onscreen with the name T-Rudder and OK status.
7. In the Game Controllers dialog box, click Properties to test and view all functions.
You are now ready to play!
To Next Page
Loading...
Need help?
General
