User Manual
TECHNICAL FEATURES
REMOVABLE HEEL-RESTS (10)
The pedal set’s 2 heel-rests are removable.
2 different ergonomic configurations are possible:
- Foot fully positioned on the pedal
(with the heel-rest installed); or
- Ball of the foot positioned at mid-pedal
(with the heel-rest removed)
To remove the heel-rests
:
- Using the included Allen key (11), unscrew and remove the 2 screws from each heel-rest.
- Completely remove the heel-rests from the pedals.
Please note: carry out this procedure in reverse to reinstall the heel-rests.
2. Rudder axis
3. Axes for independent differential
brakes
4. Pedal set’s male RJ12 connector
5. RJ12/USB adapter
Adapter’s female RJ12 connector
7. Adapter’s USB connector
8. Adapter’s selector switch
9. Adapter’s LED
10. Removable heel-rests
11. Allen key