IMPORTANT NOTES REGARDING AUTOMATIC CALIBRATION OF
AXES
To avoid any calibration problems:
- Always leave the rudder axis centered (without placing your feet on the rudder) when
connecting the TFRP pedal set using the adapter’s USB connector.
- Never connect the pedal set to the adapter when the adapter is connected to a PC or
during a game.
- Never disconnect the pedal set from the adapter when the adapter is connected to a PC
or during a game. Power off the PC first.
- Always connect the pedal set to the adapter before connecting the adapter’s USB
connector to the PC.
The pedals’ 3 axes automatically calibrate themselves after a few movements, and after
having reached the physical stops for the rudder axis and the 2 differential brake axes.
To Next Page
Loading...
