PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET:
PLEASE READ BEFORE PROCEEDING!
Your racing wheel’s power supply varies according to the country where you purchased your
device. The power supply can be:
Internal, with:
a power supply unit located directly inside the racing wheel’s base, with a type A
connector.
a 220-240 V power supply cable.
= compatible only with 220-240 V electrical power.
Never connect the 220-240 V cable to
a 100-130 V electrical outlet!!!
Never connect this cable to a power adapter!!!
Internal, with:
a power supply unit located directly inside the racing wheel’s base, with a type A
connector.
a 100-125 V power supply cable.
= compatible only with 100-125 V electrical power.
Never connect the 100-125 V cable to
a 220-240 V electrical outlet!!!
Never connect this cable to a power adapter!!!
IMPORTANT: if you do not know which voltage is supplied in the area in which you are
using your racing wheel, please ask your local electricity supplier.
External, with:
an external power supply unit, with a type B connector.
a power supply cable.
= compatible with all electrical voltages, from 110-240 V.
3/16
To Next Page
Loading...
