RUDDER SYSTEM
Three axes are reserved for the TPR* and TFRP* rudder systems.
The TPR* rudder system connects to the joystick.
1. Set the selector switch (14) located at the back of the joystick to the Xbox or PC
position.
2. Connect the rudder system’s USB-A — USB-B cable to the Type-B USB port on the
rudder system, and to a Type-A USB port (17) located at the back of the joystick.
3. Connect the USB-C — USB-A cable (8) to the Type-C USB port (16) on the joystick,
and to a Type-A USB port on the console or PC.
On Xbox Series X|S* / Xbox One*, it is not possible to connect a TPR* rudder system when
two TCA Quadrant Airbus Edition* throttle systems are already connected to TCA
Sidestick X Airbus Edition.
*sold separately
To Next Page
Loading...
