ATTACHING THE TCA QUADRANT AIRBUS EDITION* AND
THE TCA QUADRANT ADD-ON AIRBUS EDITION MODULES
TO THE TM FLYING CLAMP*, A COCKPIT* OR OTHER
STATIONARY SURFACE
*Sold separately
You can use the 6 perforations located on the underside of the TCA Quadrant Airbus
Edition, when connected to the TCA Quadrant Add-On Airbus Edition modules, to attach all
of the devices to a stationary surface, using M6 screws (not included).
Attachment diagram for the TM Flying Clamp* (*sold separately):
To Next Page