CONNECTING THE TFRP* RUDDER SYSTEM TO THE TCA
QUADRANT AIRBUS EDITION THROTTLE QUADRANT
* Sold separately
The TCA Quadrant Airbus Edition throttle quadrant has 7 axes, with 3 of these axes being
reserved for the TFRP rudder system.
The TFRP rudder system connects directly to the TCA Quadrant Airbus Edition throttle
quadrant.
1. Connect the male RJ12 connector for the TFRP rudder sy st em t o the f emale R J12
connector located at the back of the TCA Quadrant Airbus Edition throttle quadrant.
2. Connect the USB connector for the TCA Quadrant Airbus Edition throttle quadrant to one
of the USB ports on your PC.
Important notes regarding automatic calibration of axes:
- Always leave the rudder axis centered when connecting the TFRP rudder system to the
TCA Quadrant Airbus Edition throttle quadrant: never put your feet on the TFRP rudder
system’s pedals when doing so.
- The pedals’ 3 axes automatically calibrate themselves after a few movements, and after
having reached the physical stops for the rudder axis and the 2 differential brake axes.
T.A.R.G.E.T ADVANCED PROGRAMMING SOFTWARE
(Thrustmaster Advanced pRogramming Graphical EdiTor)
Please visit https://support.thrustmaster.com. Click Joysticks / TCA Quadrant Airbus
Edition, then select Software. Download and install the T.A.R.G.E.T advanced
programming software.
Main features of T.A.R.G.E.T:
- Different possible configurations for the axes.
- Different possible programming levels: Basic, Advanced and Script.
- Use of the Drag and Drop principle.
- Ability to combine the TCA Quadrant Airbus Edition throttle quadrant with various
Thrustmaster joysticks (HOTAS Cougar, HOTAS Warthog, T.16000M, MFD Cougar
Pack, all of which are also compatible with T.A.R.G.E.T), allowing them to be recognized
as a single USB device.
- Access to advanced profiles created by the Thrustmaster community.
To Next Page
Loading...
Need help?
General
