Need help?Do you have a question about the Thrustmaster TX racing wheel and is the answer not in the manual?
General| Compatibility | Xbox One, PC |
|---|---|
| Pedals | Included (2 pedals) |
| Wheel Diameter | 11 inches / 28 cm |
| Removable Wheel | Yes |
| Connectivity | USB |
| Type | Racing wheel |
| Force Feedback | Yes |
| Rotation Angle | 900 degrees |
| Power Supply | External power adapter |
| Dimensions | 320 x 270 x 280 mm |
Details about the 220-240V internal power supply unit and cable.
Details about the 100-125V internal power supply unit and cable.
Details about the external power supply unit and cable.
Safety instructions to prevent electric shock and ensure safe product operation.
Recommendations for maintaining airflow around the steering wheel base.
Warning about using the pedal set without shoes to prevent injuries.
Advice to avoid muscle or joint pain from force feedback and repeated movements.
Guidelines for keeping the product away from children and proper handling.
Precautions to avoid finger pinching hazards with the pedals during gameplay.
Instructions for storing the pedal set safely to prevent pinch hazards.
Step-by-step guide for attaching the racing wheel to its base using connectors.
Instructions for securing the racing wheel to a table or desktop surface.
Procedure for mounting the racing wheel base onto a cockpit shelf using screws.
Steps to connect pedals, power, and USB to the console for Xbox One setup.
Process of automatic calibration for the racing wheel upon connection.
Procedure for automatic pedal set calibration after wheel setup.
Ensuring controller pairing component is visible to Kinect for detection.
Explanation of the temperature sensor and potential shutdown procedure.
Using the MODE button to swap accelerator and clutch pedals electronically.
Overview of the technical features and components of the pedal set.
Guide to adjusting the height of the accelerator pedal using screws and an Allen key.
Steps to adjust the spacing and inclination angle of the pedals.
Procedure for installing the conical stop mod onto the brake pedal's metal support.
How to adjust the brake pedal's resistance and travel range using the conical stop.
To Next Page
