Thrustmaster TX racing wheel - Wheel to Table;Desktop Attachment

ATTACHING THE RACING WHEEL
Attaching the racing wheel to a table or a desktop
1. Place the racing wheel on a table or any other horizontal, flat and stable surface.
2. Insert the fastening screw (11) in the attachment system (10), then tighten the device by
turning the screw counterclockwise, so that it feeds into the large threaded hole (9)
located beneath the racing wheel, until the device is perfectly stable.
ALWAYS NEVER
WARNING: Never tighten the screw alone, without the attachment
system!
(This could damage the racing wheel).