Thule Infant Sling - Installing the Metal D-Rings; Single Occupant Carrier Installation; Installing the Foot Bar; Double Occupant Carrier Installation

51100933 - D
3
CTS CROSS-COUNTRY SKI KIT
1.1 instaLLinG the MetaL D-rinGs
The following instructions only apply for single occupant
child carriers.
A. Remove the bolts from the accessory mounts on
the Thule child carrier.
B. Replace the bolts through the metal D-rings into
the accessory mounts. Make sure the D-rings are
pointing inwards once installed. (See image 1)
1
1.2 instaLLinG the Foot Bar
The following instructions only apply for double occupant
child carriers.
A. Remove the bolts from the accessory mounts on
the Thule child carrier.
B. Position both ends of the foot bar over the
accessory mounts.
C. Replace the bolts through the metal washer and the
ends of the foot bar into the accessory mounts.
(See image 2)
2
WARNING
Regularly check to make sure the D-rings/
foot bar are securely attached to the
accessory mounts.