WARNING: Ensure ratchet arm is fully engaged to bicycle wheel before locking.
WARNING: The support arm V-notch must be firmly seated against the tire and fork. Failure to do so may result in bike instability.
Always shake your bike to ensure the hook is fully seated
4
•
Place the bicycles front wheel in the rack as shown with the tire against
the tailgate.
• Rotate the hook arm up until it contacts the back of the fork.
• Rachet the arm tightly against the wheel. You should hear a minimum of
2 clicks past intial contact with the tire.
•
Insert change key into lock cylinder.
• Remove change key, insert key to lock and unlock.
• Insert lock plug on opposite side of grip, into the lock cylinder.
NOTE: This feature is only a theft deterrent. Best used with
locking tailgate
To Previous Page
Loading...
Need help?
General
