Need help?Do you have a question about the THUNDER TIGER PRO-40 and is the answer not in the manual?
General| Type | 2-stroke glow engine |
|---|---|
| Fuel Type | Glow fuel |
| Bore | 21.5 mm |
| Stroke | 18.8mm |
| Practical RPM | 2, 000 RPM |
| Recommended Propeller | 10x6, 11x6 |
| Muffler | Included |
| Displacement | 6.48 cc |
| Carburetor Type | 2-Needle Carburetor |
Key safety precautions for operating the model engine, emphasizing it is not a toy and requires secure mounting and spectator safety.
Instructions for securely mounting the engine to rigid rails or a radial mount, stressing flatness and quality hardware.
Details on the recommended break-in process for Thunder Tiger PRO engines, suggesting ground or model testing.
Adjusting the needle valve after starting for rich smoke, then leaning for peak RPM.
Post break-in adjustment to lean for maximum RPM and then richen slightly for optimum setting.
Procedure for adjusting the idle and low-throttle fuel mixture using specific testing methods.
Details the 3-year warranty against defects and exclusions for crash damage or improper use.
Instructions for returning engines for service, including required documentation and contact information.
Advice on choosing propeller sizes based on aircraft factors and performance goals, avoiding defective blades.
To Next Page