Thunder TH-0119M - LCD Display Operation; Display Elements and Indicators

4
3. LCD Display Operation
3.1 Display Instruction
2. P0 Restore the Factory Settings.
Enter into the Main Menu, set”
P0” Long Press “Left” key for 30
seconds, Then the display will
restore to factory setting
3. P1: Miles / Kilometers Setting.
Enter into the Main Menu Press P1,
Press “Left” or “Right” Key, choose “0”
or “1” (0 is Kilometers & Miles is 1)
Press “left” or “Right” Combination
key to exit.
1.LongPress “Left” “Right” Combination
key, enter into “main Menu Mode”
Then Short Press “Right Key and set
from P0-P7 Long Press “Right” Key to
change the setting function “Left” Key
Then “A”, Press Left key to increase
numerical Value, Then “d”, Press Left
key to reduce numerical value.