Thunderfunk Bass Amplifiers - Recording Outputs; Recording Level

12 | ThunderfunkBassAmpliersUsersManual
RecordingOutputs
The backpanelgivesalltheconnectivityonecouldaskfor.Useitasafullyintegratedamplier,
asaDI,asapreamp,asaPowerAmplier.Usethefeaturesstand-alone,orcombined.(Note:The
voltage selector switches are under the cover plate, above the AC power connector)
Direct Instrument Balanced Output
ThisDIOutputisabalancedXLRconnector,abufferedbutotherwiseexactreplicaoftheinstru-
mentinputexceptatlinelevel.Thiscanberoutedtoanotheramplieroramixingconsolefor
pure instrument tone unadulterated by any front panel settings. This can also be routed to a
tuner.
Post EQ and Limiter Balanced Output
ThisisabalancedXLRoutputjack,withavariableoutputadjustedbytheRecordLevelcontrol.
ThebranchforthisisAFTERtheGain/Limiter,EffectsLoop1,alltheEQcontrols,theEnhancer,
and the Timbre controls, but before the front panel Volume (next to the power switch), the Effects
Loop2,andthePowerAmp.SignalsfromthisXLRarethereforefullycontrolledandtoneshaped
by the preamp; it can be routed to a mixing console, direct to the PA or direct to another Power
Amp/SpeakerSystem.Pin2isthe+signal.YoucanalsousethisDIOutputandaspecialXLRto
Phone jack cable to daisy chain several Thunderfunk slave amps together, matching the setup
with one set of preamp controls working all the power amp and speaker systems simultaneously.
See your dealer for more information on possible setups.
RecordingLevel
ThiscontrolsthelinelevelstrengthbeingsentfromtheXLRbalancedoutputjack.Youcanalso
usethisDIOutputandaspecialXLRtoPhonejackcabletodaisychainseveralThunderfunkslave
amps together, matching the setup with one set of preamp controls working all the power amp
and speaker systems simultaneously. See your dealer for more information on possible setups.