ThyssenKrupp S200 User Manual

3.3.5 Communication Module
To answer an incoming telephone call or to call for help in case of an emergency, the
stairlift can be fitted with a Communication Module.
The Communication Module is connected to a DECT telephone base station and is
operated by 1 button, located in the armrest opposite the joystick user interface. It works
on a rechargeable battery that is charged by the drive unit.
An incoming call can be answered by shortly pressing the alarm button (+/- 1sec.). In
addition, 3 telephone numbers can be pre-programmed in the Communication Module.
When the alarm button is pressed for more than 4 seconds, the first programmed number
will be dialled. To dial the next number, press the alarm button once again shortly (+/-
1sec.). Pressing the alarm button for more than 4 seconds will end the emergency call
loop.
The button’s LED indicators indicate the status of the
Communication Module.
30. Communication Module
31. Alarm button
30
31
Description 15

ThyssenKrupp S200 Specifications

General

Brand	ThyssenKrupp
Model	S200
Category	Stairlifts
Language	English