Need help?Do you have a question about the Tianlan Tl-510 and is the answer not in the manual?
General| Brand | Tianlan |
|---|---|
| Model | Tl-510 |
| Category | Measuring Instruments |
| Language | English |
Details specifications for the TL-510A model, including measurement range and calibrated wavelengths.
Details specifications for the TL-510B model, including measurement range and calibrated wavelengths.
Controls power on/off and the 10-minute auto-off function. Short press toggles auto-off; long press for power.
Switches the display unit between Watts (W) and dBm for absolute power measurement mode.
Selects the measurement wavelength from the available calibrated wavelengths. The chosen wavelength appears on the LCD.
Enters relative measurement mode. Press and hold to save reference value or switch between working modes.
Controls the LCD backlight. It auto-turns off in one minute but can be reactivated by pressing any key.
Provides instructions for powering the unit on and off, and managing the auto-off feature.
Guides users through performing absolute power measurements, including setting wavelength and units.
Details the procedure for setting up and executing relative power measurements.
Explains the process for calibrating the meter to ensure accuracy against other measurement devices.
Describes how to activate or deactivate the automatic power-off function for energy saving.
Instructions on how to replace the batteries when the level is low, with important safety notes.
To Next Page